01-04-2016, 03:24 AM
EH UP ALL!HAPPY NEW YEAR!
well its that time again sorry for bein away for so long,but im here now.
i've been workin on the cockpit area,first off i made the floor and the backin plate for the cockpit .
next up i started on the doorway and the back wall.
and to get all the fibre optics in the back wall i made the back computer panels out of half mm styrene and drilled out the 2mm backin wall.
well after i drilled and fitted the back panels i put the fibre optics in and you can see what it's gonna look like.
.
i had a few issues with the lightin of the back wall first off i tried to use a torch bulb but the light wasn't bright enough so i used some LED's for the fibre optics and the back wall strip lights which are behind some clear styrene that has been sanded to make it appear frosted.here you can see the workin's.
and here in position with the cone on.
next up i started on the side walls and gave the whole front end a coat of matt black.on this photo you can see i've made a start on the front console's base,which is just made up of 1mm styrene and the hole is for more fibre optics to go in.
.
i think i may have to do another update to get all this in.so for this bit of my progress thats it....hope you like...cheers peza
pt 1 over...
well its that time again sorry for bein away for so long,but im here now.
i've been workin on the cockpit area,first off i made the floor and the backin plate for the cockpit .
next up i started on the doorway and the back wall.
and to get all the fibre optics in the back wall i made the back computer panels out of half mm styrene and drilled out the 2mm backin wall.
well after i drilled and fitted the back panels i put the fibre optics in and you can see what it's gonna look like.
i had a few issues with the lightin of the back wall first off i tried to use a torch bulb but the light wasn't bright enough so i used some LED's for the fibre optics and the back wall strip lights which are behind some clear styrene that has been sanded to make it appear frosted.here you can see the workin's.
and here in position with the cone on.
next up i started on the side walls and gave the whole front end a coat of matt black.on this photo you can see i've made a start on the front console's base,which is just made up of 1mm styrene and the hole is for more fibre optics to go in.
i think i may have to do another update to get all this in.so for this bit of my progress thats it....hope you like...cheers peza
pt 1 over...