+- Forums (https://www.studioscalemodelers.com/forums)
+-- Forum: Index (https://www.studioscalemodelers.com/forums/forum-623.html)
+--- Forum: General Modelling (https://www.studioscalemodelers.com/forums/forum-680.html)
+--- Thread: Clawcraft in 1/72nd by REL (/thread-490.html)
Clawcraft in 1/72nd by REL - DarthDuck - 02-10-2010
Here's the soon to be available (from SSM store) Clawcraft by REL.
A very nicely done kit although my copies are not the ones which will be cast by Blappy for SSM. They are preproduction test shots which I received for my contribution of the guns and wing thrusters on the master by REL. I've had em for a long while now but since the store should soon have them available I'll go ahead and build one up to suit myself.
![[Image: 100_1429.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1429.jpg)
RE: Clawcraft in 1/72nd by REL - JAWS - 02-10-2010
Sweeet. This will be another good one. I have a question. Did you finish the other ones? The Y & the Tie?
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-10-2010
(02-10-2010, 08:21 PM)jasonwright.1972 Wrote: Sweeet. This will be another good one. I have a question. Did you finish the other ones? The Y & the Tie?
I'm sorry. Our line seems to be breaking up. Too much static. I can b.....a.....r.....el....y................@@@@@@@@@@@@@@@@@@@
RE: Clawcraft in 1/72nd by REL - JAWS - 02-11-2010
Ok I get the message "f*%k O@f Jase"
RE: Clawcraft in 1/72nd by REL - 427 Cobra - 02-11-2010
That's funny right there - I don't care who you are!
Git-R-done!
RE: Clawcraft in 1/72nd by REL - scratchy - 02-11-2010
Yeah.... What he said
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-12-2010
While browsing Wikipedia I came across a Clawcraft version with an alternate "canopy". Rather than the flat glass of a standard tie it has dome like glass suspended within two different rings with six stringers from the outer ring to the inner ring. So, scrounging up some "stuff" I set about to duplicate it. Just have those six stringers left to go now. This will simplify painting since once glued together it will be a one piece framework with two pieces of "glass" that can be added into the framing after paint.
![[Image: 100_1432.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1432.jpg)
RE: Clawcraft in 1/72nd by REL - JAWS - 02-13-2010
You have an 'eye' for detail quackster! Hahahah!
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-13-2010
(02-13-2010, 06:28 AM)jasonwright.1972 Wrote: You have an 'eye' for detail quackster! Hahahah!
That's what the alternate canopy reminded me of!
And with the lil "spokes" added:
![[Image: 100_1436.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1436.jpg)
RE: Clawcraft in 1/72nd by REL - JAWS - 02-13-2010
Not sure you totally got my line which I thought was quite clever. Im not usually good at puns but you just seem to bring out the need to have a quack sorry I mean crack! Nice work Don as usualis!
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-13-2010
(02-13-2010, 08:52 AM)jasonwright.1972 Wrote: Not sure you totally got my line which I thought was quite clever. Im not usually good at puns but you just seem to bring out the need to have a quack sorry I mean crack! Nice work Don as usualis!
Naw Jase, no worries, I got it!
Those craft store "rollie eyes" (in the picture) are excellent sources for domes and such. They come in a surprising variety of sizes and this isn't the first time I've taken advantage of them.
But the picture I stumbled upon really did look a lil bit like a big eyeball up front too!
And don't worry, I never believed all them blokes who said you were a humorless sod!
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-13-2010
And, in primer:
![[Image: 100_1438.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1438.jpg)
![[Image: 100_1437.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1437.jpg)
![[Image: 100_1440.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1440.jpg)
![[Image: 100_1442.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1442.jpg)
RE: Clawcraft in 1/72nd by REL - scratchy - 02-14-2010
Nice looking work Don! I like how you utilized the "Plastic Eye" for the windshield/viewport.
Eagerly awaiting more
RE: Clawcraft in 1/72nd by REL - JAWS - 02-14-2010
Yes Don looking sharp. So are you going hollow this sucker out also or is this going to be a 'basic' build up?
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-14-2010
(02-14-2010, 06:40 AM)jasonwright.1972 Wrote: Yes Don looking sharp. So are you going hollow this sucker out also or is this going to be a 'basic' build up?
Straight build on this one Jason. I'm just doing it for fun and to fill a lil hole in my schedule while I've waited for my machinist to become available for the SS TIE.
RE: Clawcraft in 1/72nd by REL - JAWS - 02-14-2010
Oooh that sounds kool. Don't duck me around Don...
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-14-2010
(02-14-2010, 08:44 PM)jasonwright.1972 Wrote: Oooh that sounds kool. Don't duck me around Don...
I wouldn't duck ya buddy though you might fit the bill if I was a wise quacker.
I'm in the process of paint right now. I'm trying to do something that's hard to describe? You ever seen an octopus or squid and how it's skin can appear "mottled"? Well, I'm going for something like that. If it works I will proudly proclaim that's what is! If it fails I will say it was ,"Inpsired by".
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-14-2010
Going for a look I found online I attempted to emulate what I would describe as the somewhat mottled effect like a squid or octopus has? First a base of silver followed by "splotchy" areas of various shades of black added to the silver in many layers. Then a topcoat of green and blue ink suspended in clear with a "duo blue/green" pearl additive.
I'll follow this with some detail painting and a panel line wash.
But here it is straight from the booth so far:
![[Image: 100_1447.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1447.jpg)
![[Image: 100_1446.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1446.jpg)
![[Image: 100_1445.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1445.jpg)
![[Image: 100_1444.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1444.jpg)
![[Image: 100_1443.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/100_1443.jpg)
RE: Clawcraft in 1/72nd by REL - JAWS - 02-15-2010
It looks organic. Is that what your going for?
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-15-2010
(02-15-2010, 07:47 AM)jasonwright.1972 Wrote: It looks organic. Is that what your going for?
Yes, like Octopus skin.
So you think so then?
RE: Clawcraft in 1/72nd by REL - JAWS - 02-15-2010
Yes. Any chance of a photo without the flash?
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-22-2010
And here it is after the panel line wash (subtle mid grey) and parts added then flat coated on a base-
![[Image: 000_0002-3.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/000_0002-3.jpg)
![[Image: 000_0001-2.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/000_0001-2.jpg)
![[Image: 000_0003-2.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/000_0003-2.jpg)
![[Image: 000_0004-3.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/000_0004-3.jpg)
![[Image: 000_0005-4.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/000_0005-4.jpg)
![[Image: 000_0006-2.jpg]](http://i187.photobucket.com/albums/x66/DuxWerx/Star%20Wars/000_0006-2.jpg)
RE: Clawcraft in 1/72nd by REL - 427 Cobra - 02-22-2010
You need to add some flames to the wings!
Seriously,Don - you did a great job on this. I wonder what other kind of paint schemes can be done to make these look more real world? Don't get me wrong,I like the industrial look of the orginal ILM models of the seventies,and eigthies,but it's nice to see something different every now,and then.
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-22-2010
(02-22-2010, 04:15 PM)427 Cobra Wrote: You need to add some flames to the wings!
I looked up the craft on Wookiepedia and besides a "standard grey" I found something like this which caught my eye. I have no clue what else might be appropriate but of course anyone who gets the kit can show us their ideas.
RE: Clawcraft in 1/72nd by REL - JAWS - 02-23-2010
Nice work Ducksta. Different i might say. I like it. Can't believe theres lights on this aswell, but then again you built it.
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-23-2010
(02-23-2010, 04:58 PM)jasonwright.1972 Wrote: Nice work Ducksta. Different i might say. I like it. Can't believe theres lights on this aswell, but then again you built it.
Naw, "fooled you" on the lights. But it's not photoshopped and I have been waiting for someone to mention it. Congratulations, you're the first.
BTW: You know I "could have" lit it- but I really just wanted to enjoy an "OOB" build for a change.
RE: Clawcraft in 1/72nd by REL - JAWS - 02-23-2010
So what did you use? Reflector tape? Thats not like painted is it? If so that is excellent. You got me.
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-23-2010
(02-23-2010, 08:18 PM)jasonwright.1972 Wrote: So what did you use? Reflector tape? Thats not like painted is it? If so that is excellent. You got me.
Craft Store "jewels" (Rhinestones). They come in various sizes and colors and even have their own sticky back. Just picked em out and plopped em in.
RE: Clawcraft in 1/72nd by REL - JAWS - 02-24-2010
Some Bling!
RE: Clawcraft in 1/72nd by REL - DarthDuck - 02-25-2010
(02-24-2010, 10:13 AM)jasonwright.1972 Wrote: Some Bling!
HaHa,
"Bling, it's a feathered wing thing!"
Quack!
RE: Clawcraft in 1/72nd by REL - erospawn - 02-25-2010
or, it ain't nuthin but a chicken wing