+- Forums (https://www.studioscalemodelers.com/forums)
+-- Forum: Index (https://www.studioscalemodelers.com/forums/forum-623.html)
+--- Forum: Studio Scale Replica Builds In Progress (https://www.studioscalemodelers.com/forums/forum-678.html)
+--- Thread: millenium falcon 32" my story so far (/thread-1691.html)
RE: millenium falcon 32" my story so far - daverep - 02-06-2014
Interested to see how you put this together. I'm trying to make the same decision on mine. I'd hate to permanently attach my two halves together in case I have to rewire something down the road. Nice job and great idea! Good luck with this!!!
-Dave
RE: millenium falcon 32" my story so far - peza - 02-09-2014
eh up all, i`ve been doin abit more this week,firstly i got the 2 halves to join together with my newly cut down bolts which will be hidden in the leg bays.
and the bolts i used i surrounded them with some superfine milliput and shaped them up to help guide the bolts into place here are some images
and i hope this is a help for you dave!
[attachment=15564][attachment=15565][attachment=15566][attachment=15567]
next i started to get back on the ramp again i had a close look at the hinge i made and it had started to snap so i had to fix it and beef it up alittle,
the next job is to glue the top half of the ramp in place and here are some images of that for you jase!
[attachment=15568][attachment=15569][attachment=15570]
my next job is to start knockin up the cockpit,and i`m in 2 minds to put the mind your head red light`s in the model,does anybody have any thoughts?
cheers all i`m gonna have another play on it 2nite....peza
RE: millenium falcon 32" my story so far - peza - 02-13-2014
eh up all,
i`ve got abit more done this week.
i wanted to carry on with the front magnets by the mandibles but due to me not havin any milliput i`ve had to put that on the back burner til this weekend,so i started to knock up the cockpit...
first off i made a jig for it,[attachment=15581] then shaped up some cardboard around it to use as my template.after i cut out the card i made up 2 copys on half mil thick styrene with an inch overlap and glued the two edges down in position...[attachment=15582]
next i made up abit of the tunnel extenion(i think it looked to short)...[attachment=15583]
and finally i got the whole thing sittin pretty,[attachment=15584]and then started to doddle where the windows should be
...[attachment=15585]oh and i liberated this thin sheet copper from work to made the grill that goes around the tunnel ny the cockpit,but this is gonna take me a good while to get done,if i dont bugger it up![attachment=15586]
sorry for the little progress at the mo,cheers peza
RE: millenium falcon 32" my story so far - peza - 02-19-2014
eh up all,i managed to get the windows cut out and lined with some half mil thick styrene.i had to use me pin vice and me toe snippers..er!
but i had to cut out each window one at the time just to drop the risk of splittin the cone. [attachment=15589][attachment=15590][attachment=15591]
and here is acouple of images of the finished bit,i`ve not done awt with the copper as yet but i`ll have a go tonight and do a little more on it!
[attachment=15593][attachment=15592]
hope ya like...cheers peza
RE: millenium falcon 32" my story so far - JAWS - 02-19-2014
Excellent work!
RE: millenium falcon 32" my story so far - peza - 02-19-2014
eh up jase,cheers buddy!...peza
RE: millenium falcon 32" my story so far - peza - 02-19-2014
eh up all,
i got a little update on the cockpit nose cone,first off i armour plated it where i think they are from what i can tell!
[attachment=15594]
next i started makin up the front circular window,which i used some plastic plumber`s pipe and some 1 mil thick styrene it came out really well hope ya like.[attachment=15595][attachment=15596]
cheers peza
RE: millenium falcon 32" my story so far - darkimmitator - 02-19-2014
Awesome work Peza. Really enjoy your updates !!!
RE: millenium falcon 32" my story so far - daverep - 02-19-2014
Simply...NICE!
-Dave
RE: millenium falcon 32" my story so far - peza - 02-20-2014
(02-19-2014, 11:17 AM)darkimmitator Wrote: Awesome work Peza. Really enjoy your updates !!!
cheers buddy,it`s gettin there slowly mym8...thanks alot peza
RE: millenium falcon 32" my story so far - peza - 02-20-2014
(02-19-2014, 12:21 PM)daverep Wrote: Simply...NICE!
-Dave
cheers dude thats llike something out of jaz club with john tompson and the fast show!!sweet....cheers peza
RE: millenium falcon 32" my story so far - Wombat - 02-20-2014
Real nice bit of scratch building going on there! Things are sure looking damn good and this will be a sweet looking miniature when ya done the way things are panning out.
Good stuff peza!
RE: millenium falcon 32" my story so far - peza - 02-20-2014
(02-20-2014, 04:11 PM)Wombat Wrote: Real nice bit of scratch building going on there! Things are sure looking damn good and this will be a sweet looking miniature when ya done the way things are panning out.
Good stuff peza!
cheers buddy,it`s really comin together nicely now/for now.thanks mym8...peza
RE: millenium falcon 32" my story so far - peza - 02-23-2014
eh up all.
just a little update on my cockpit,i got it finished and did a little more on the copper grillin.
[attachment=15602]
next i gave the cone a blast of primer and that is it til i paint it,[attachment=15603][attachment=15604]
[attachment=15605][attachment=15606]
here are some images hope ya like cheers peza
RE: millenium falcon 32" my story so far - Wombat - 02-23-2014
Fine bit of work there!
RE: millenium falcon 32" my story so far - peza - 02-23-2014
(02-23-2014, 09:49 AM)Wombat Wrote: Fine bit of work there!
cheers dude!
RE: millenium falcon 32" my story so far - JAWS - 02-24-2014
Excellent.
Very clean Peza.
RE: millenium falcon 32" my story so far - LeeS - 02-24-2014
Out of interest, does anyone have a kit list/parts map for the 32" Falcon?
Not planning to make one right now, but certainly down the line....
RE: millenium falcon 32" my story so far - peza - 02-24-2014
(02-24-2014, 09:04 AM)JAWS Wrote: Excellent.
Very clean Peza.
cheers jase...
pezaRE: millenium falcon 32" my story so far - peza - 02-24-2014
(02-24-2014, 04:31 PM)LeeS Wrote: Out of interest, does anyone have a kit list/parts map for the 32" Falcon?
Not planning to make one right now, but certainly down the line....
sorry lee i have`nt got a kit list as all the parts i build myself,i cant afford to kit bash with this one mym8!i`m sure mensa boy has a kit list up somewhere?cheers peza
RE: millenium falcon 32" my story so far - daverep - 02-28-2014
(02-24-2014, 04:31 PM)LeeS Wrote: Out of interest, does anyone have a kit list/parts map for the 32" Falcon?
Not planning to make one right now, but certainly down the line....
Lee, I've got one but it's a bit of a mess. Let me clean it up and I'll send it to you. There are also a couple of kits that have have been found that I need to add to it.
Peza,
Again...this is amazing! Makes me want to blow off all of my commitments this weekend and get back to working on mine!!
-Dave
RE: millenium falcon 32" my story so far - JAWS - 03-01-2014
(02-24-2014, 04:31 PM)LeeS Wrote: Out of interest, does anyone have a kit list/parts map for the 32" Falcon?
Not planning to make one right now, but certainly down the line....
Lee there are extensive Parts Maps in the reference & research area for the 32.
RE: millenium falcon 32" my story so far - peza - 03-02-2014
eh up all,
i`ve finally got the copper grillin finished today and i`ve given it a coat of primer but i have`nt taken an image of it at that stage yet,
here are some images of my progress,and i`ll write my way through it
first off i finished cuttin all the marks i made every 2 mil.and got it mounted
[attachment=15620]
next i looked at it and the gaps were well to big so i made a load of extra pieces to fill in the gaps and there was a few
[attachment=15621]
so i started it off the other day and it took awhile to do it all,but here is the finished article,i put black electrical tape round it so i did`nt scratch it when filin it all down just to tidy it up.
[attachment=15622]
so thats it for tonight,hope ya like i`ll do some more tomorrow..cheers peza
RE: millenium falcon 32" my story so far - LeeS - 03-03-2014
Dave/Jaws
Thanks! Looking forward to any list you have Dave, no matter how messy :-)
And I'll take a better look in the Ref section too!
L
RE: millenium falcon 32" my story so far - daverep - 03-05-2014
(03-03-2014, 04:20 PM)LeeS Wrote: Dave/Jaws
Thanks! Looking forward to any list you have Dave, no matter how messy :-)
And I'll take a better look in the Ref section too!
L
Well...I was going to send my list that I finally cobbled together and...I can't figure out how to attach it to a PM.
Am I a complete idiot and missing something?
- Dave
RE: millenium falcon 32" my story so far - LastBattlestar - 03-05-2014
I'm really enjoying the updates Peza, it's looking very cool. Those cockpit windows remind me of building the delicate frames on my Storm Crow build. It drives you nuts cutting those fine shapes out and edging the openings doesn't it?
I'd add all the lights if you can, including the underside courtesy lights seen in ESB. You can always with them on separate circuits to make the model appear in any configuration. Keep up the good work mate. I love the look of a hand built model.
Mike
RE: millenium falcon 32" my story so far - peza - 03-06-2014
(03-05-2014, 02:50 PM)LastBattlestar Wrote: I'm really enjoying the updates Peza, it's looking very cool. Those cockpit windows remind me of building the delicate frames on my Storm Crow build. It drives you nuts cutting those fine shapes out and edging the openings doesn't it?
I'd add all the lights if you can, including the underside courtesy lights seen in ESB. You can always with them on separate circuits to make the model appear in any configuration. Keep up the good work mate. I love the look of a hand built model.
Mike
cheers mike,i liked buildin the cockpit,i felt llike i was buildin a key piece of the puzzle!cheers for the kind words mym8.....peza
RE: millenium falcon 32" my story so far - JAWS - 03-06-2014
Post it
(03-05-2014, 10:07 AM)daverep Wrote:(03-03-2014, 04:20 PM)LeeS Wrote: Dave/Jaws
Thanks! Looking forward to any list you have Dave, no matter how messy :-)
And I'll take a better look in the Ref section too!
L
Well...I was going to send my list that I finally cobbled together and...I can't figure out how to attach it to a PM.
Am I a complete idiot and missing something?
- Dave
RE: millenium falcon 32" my story so far - daverep - 03-06-2014
(03-06-2014, 06:26 AM)JAWS Wrote: Post it
LOL!!! I shall! Good idea, Jase!
I'll post it tomorrow night (my time) in the Reference section somewhere. I'll post a link here so I don't hijack Peza's thread.
- Dave
RE: millenium falcon 32" my story so far - peza - 03-06-2014
(03-06-2014, 01:21 PM)daverep Wrote:(03-06-2014, 06:26 AM)JAWS Wrote: Post it
LOL!!! I shall! Good idea, Jase!
I'll post it tomorrow night (my time) in the Reference section somewhere. I'll post a link here so I don't hijack Peza's thread.
- Dave
eh up dave,dont wurry about me,it`s all for the greater good!
..cheers pezaRE: millenium falcon 32" my story so far - daverep - 03-07-2014
LOL! You got it Peza!
Jase, I can also post this in the Research section as well...maybe in my Visual Kit list thread? Just let me know and I'll be happy to put this over there too. I need to go through that Visual Kit List and update that too at some point.
So, here's my kit list that I've cobbled together over the past year.
TBH, none of this is my own work except for compiling the list. Most, if not all, came from scouring threads in the 32" Falcon Research Section. All I've done is copied and pasted when someone makes a positive kit ID. So, it really is kind of redundant, but I'm more than happy to post it nonetheless.
My hat is off to everyone who has spent countless hours researching and doing the Part IDing. You guys are incredibly amazing!
And now the list:
ENTEX 1/8 Porsche Turbo Parts
Tamiya Gneisenau
Tamiya 20mm Flack 38 Hh51
Tamiya Kumano
Tamiya 1/20 Williams FW-07
Tamiya M3A2
Tamiya Churchill Crocodile
Airfix Mauretania
Airfix Belfast
Tamiya Prince of Whales
Tamiya Yamato
Airfix Ark Royal
Tamiya Flakvierling 38 Ah52
Tamiya Leichter 223
Italieri Jagdtiger 186
Airfix German Armored Car 234
Airfix Matilda Hedgehog
Airfix M4 Sherman
Airfix Panther (x2)
Airfix Scorpion
Hasegawa M4A3 Sherman
Tamiya Scharnhorst
Tamiya King George V
ESCI Sd Kfz 10/4
Tamiya Hornet
Tamiya Japanese Tank Type 97
Jo-Han Mercedes Benz
Tamiya Yahagi
Tamiya 1/20 Lotus 78
Tamiya 1/20 Tyrell P34 (x2)
Tamiya M41 Walker Bulldog
Tamiya 8 Rad
Tamiya Panther
Tamiya Panzer Kampfwagan III Ausf M/N
Tamiya Hanomag
Tamiya British 25 Pounder
Tamiya Lang
Tamiya KV-I
Tamiya Karl
Tamiya Chieftan
Tamiya KV-II
Tamiya M16
Tamiya Gepard
Tamiya M3 Lee
Tamiya Shinano (Vintage)
Bandai Schwimmwagen
Rocco Leopard (x2)
Rocco Flackpanzer
Airfix Saturn V (Re-Tool & Vintage)
Revell USS Midway
Tamiya Tirpitz
Tamiya Akagi
Revell B-29
Tamiya 1/35 Sheridan M5A1
Tamiya 1/35 Leopard A4
Plastruct LF-3 Lamp Shades
Plastruct VHE-300 (Accepted substitute for the Radar Dish)
Tamiya 1/35 Russian Tank Destroyer SU-85
Tamiya 1/35 Quad Gun Tractor
Tamiya 1/35 Russian Tank Destroyer SU-122
Airfix 1/24 P51-D Mustang
Tamiya 1/35 Wirblewind
Tamiya 1/35 Matilda
Airfix 1/76 Sheridan Tank
Tamiya 1/12 Tyrrell P34 6 Wheeler
AMT 1/25 Chi Town Hustler
Bandai 1/48 Panther Ausf.G Sd.Kfz.171
Tamiya 1/35 Japanese Tank Type 61
Tamiya 1/700 Hood
Tamiya 1/12 Ferrari 312T
Tamiya 1/12 Tyrrell Ford F-1
Tamiya 1/20 Tyrell Ford F1
Tamiya 1/35 M60A2 Medium Tank
Tamiya 1/25 Chieftain
Tamiya 1/35 Jagdpanzer V
Tamiya 1/35 Leichter Panzerspahwagen Sd.kfz 222
Tamiya 1/35 Marder 1A2
Tamiya Nelson
Tamiya 1/25 SU-100
Tamiya Taiho
Airfix 1/72 Shooting Star
I had to do a little cleaning up and I'm hoping I matched the kit manufacturers with the correct kits. I'm 99% sure I did. If not, just let me know and I'll fix it.
Hope this helps!
-Dave
RE: millenium falcon 32" my story so far - JAWS - 03-07-2014
There is already a Kit List thread so we just need to update it.
RE: millenium falcon 32" my story so far - daverep - 03-07-2014
(03-07-2014, 12:59 PM)JAWS Wrote: There is already a Kit List thread so we just need to update it.
Agree. Let me know if you want me to do anything. I'm more than happy to help. And I certainly don't want to clutter up or duplicate anything. At least no more than I have already!
LOL!!!
-Dave
RE: millenium falcon 32" my story so far - peza - 03-09-2014
eh up all.
i managed to get the cockpit finished and the tunnel attached to the main model,firstly i had to cut the old tunnel back abit because with the grillin and the cockpit it just stud out to far.so usin my dremel i cut the tunnel back and removed the armour plates that would get damaged or need replacin.
[attachment=15633]
[attachment=15634]
i cut it and messed it up abit,so i had to line the inner of the tunnel with some half mm thick styrene,after that i covered the gap with some milliput white(superfine) and used a wooden ice lolly stick to shape it up roughly,with a little but of water at the end just to get it nice and smooth,and i wont have to sand it back much!
[attachment=15635]
[attachment=15636]
then i had to put the armour plates back on,some went on and fitted just the same but some needed to be cut back and some needed to be made new
[attachment=15637]
[attachment=15638]
finally a coat of primer and it`s some our alright.
[attachment=15639]
[attachment=15640]
so thats it for the cockpit,i`m gonna leave the interior for now and do some work on the side detail`s and the dockin rings..hope ya like the progress so far..cheers peza
RE: millenium falcon 32" my story so far - peza - 03-11-2014
eh up all,
here`s another post for ya,and this one`s got me nervous,i was gonna buy some of mensa boys smart bits,but i`ve been told by the bettwer half that we can`t afford!
so i`m havin to made the Porsche gearbox bits myself,i`ve not finished it yet but here`s my progress so far.
first off i made the skin for the mandible on the cockpit side,just to get the size of the gearbox bit to scale.i used some 1mm thick styrene and the sheath of a pen for the circular shape because it was the only thing in the house that was the same size`ish.
[attachment=15659]
next i made up some ribs for the skin to form to and put a doube skin of styrene,because the top is shaped up with a curve.
[attachment=15660]
then a skin on that part of it.
[attachment=15661]
and then a coat of primer,once that had dried i started on the coolin ribs,which i think is gonna take me awhile.
[attachment=15662]
well that`s it for now i`ll post some more when i`ve got a fair bit more done.hope ya like cheers peza
RE: millenium falcon 32" my story so far - JAWS - 03-11-2014
Looking good buddy.
If I was in a better position I could give you castings of the ENTEX parts.
RE: millenium falcon 32" my story so far - JAWS - 03-11-2014
(03-07-2014, 12:23 PM)daverep Wrote: LOL! You got it Peza!
Jase, I can also post this in the Research section as well...maybe in my Visual Kit list thread? Just let me know and I'll be happy to put this over there too. I need to go through that Visual Kit List and update that too at some point.
So, here's my kit list that I've cobbled together over the past year.
TBH, none of this is my own work except for compiling the list. Most, if not all, came from scouring threads in the 32" Falcon Research Section. All I've done is copied and pasted when someone makes a positive kit ID. So, it really is kind of redundant, but I'm more than happy to post it nonetheless.
My hat is off to everyone who has spent countless hours researching and doing the Part IDing. You guys are incredibly amazing!
And now the list:
ENTEX 1/8 Porsche Turbo Parts
Tamiya Gneisenau
Tamiya 20mm Flack 38 Hh51
Tamiya Kumano
Tamiya 1/20 Williams FW-07
Tamiya M3A2
Tamiya Churchill Crocodile
Airfix Mauretania
Airfix Belfast
Tamiya Prince of Whales
Tamiya Yamato
Airfix Ark Royal
Tamiya Flakvierling 38 Ah52
Tamiya Leichter 223
Italieri Jagdtiger 186
Airfix German Armored Car 234
Airfix Matilda Hedgehog
Airfix M4 Sherman
Airfix Panther (x2)
Airfix Scorpion
Hasegawa M4A3 Sherman
Tamiya Scharnhorst
Tamiya King George V
ESCI Sd Kfz 10/4
Tamiya Hornet
Tamiya Japanese Tank Type 97
Jo-Han Mercedes Benz
Tamiya Yahagi
Tamiya 1/20 Lotus 78
Tamiya 1/20 Tyrell P34 (x2)
Tamiya M41 Walker Bulldog
Tamiya 8 Rad
Tamiya Panther
Tamiya Panzer Kampfwagan III Ausf M/N
Tamiya Hanomag
Tamiya British 25 Pounder
Tamiya Lang
Tamiya KV-I
Tamiya Karl
Tamiya Chieftan
Tamiya KV-II
Tamiya M16
Tamiya Gepard
Tamiya M3 Lee
Tamiya Shinano (Vintage)
Bandai Schwimmwagen
Rocco Leopard (x2)
Rocco Flackpanzer
Airfix Saturn V (Re-Tool & Vintage)
Revell USS Midway
Tamiya Tirpitz
Tamiya Akagi
Revell B-29
Tamiya 1/35 Sheridan M5A1
Tamiya 1/35 Leopard A4
Plastruct LF-3 Lamp Shades
Plastruct VHE-300 (Accepted substitute for the Radar Dish)
Tamiya 1/35 Russian Tank Destroyer SU-85
Tamiya 1/35 Quad Gun Tractor
Tamiya 1/35 Russian Tank Destroyer SU-122
Airfix 1/24 P51-D Mustang
Tamiya 1/35 Wirblewind
Tamiya 1/35 Matilda
Airfix 1/76 Sheridan Tank
Tamiya 1/12 Tyrrell P34 6 Wheeler
AMT 1/25 Chi Town Hustler
Bandai 1/48 Panther Ausf.G Sd.Kfz.171
Tamiya 1/35 Japanese Tank Type 61
Tamiya 1/700 Hood
Tamiya 1/12 Ferrari 312T
Tamiya 1/12 Tyrrell Ford F-1
Tamiya 1/20 Tyrell Ford F1
Tamiya 1/35 M60A2 Medium Tank
Tamiya 1/25 Chieftain
Tamiya 1/35 Jagdpanzer V
Tamiya 1/35 Leichter Panzerspahwagen Sd.kfz 222
Tamiya 1/35 Marder 1A2
Tamiya Nelson
Tamiya 1/25 SU-100
Tamiya Taiho
Airfix 1/72 Shooting Star
I had to do a little cleaning up and I'm hoping I matched the kit manufacturers with the correct kits. I'm 99% sure I did. If not, just let me know and I'll fix it.
Hope this helps!
-Dave
Dave can you go through the existing kit list & list the updated kits for me to add?
RE: millenium falcon 32" my story so far - daverep - 03-11-2014
Jase,
Yes, sir! I certainly can! You're talking about the original ones you posted in the Reference section, right? And do you want me to PM or email you any updates? Or just post them?
Peza, nice work! BTW, if you think about it, could you snap a photo of the bottom part of your hull where the cockpit meets the hull and send it to me? I'm having a hell of a time visualizing how the tube sits in the inside of the hull. I'd appreciate it!
-Dave
RE: millenium falcon 32" my story so far - peza - 03-12-2014
(03-11-2014, 09:44 AM)JAWS Wrote: Looking good buddy.
If I was in a better position I could give you castings of the ENTEX parts.
thanks mym8!
but it`s ok i`m gettin my head round the build of it.and at the end i can say i`ve built that!cheers buddy......yours peza
RE: millenium falcon 32" my story so far - JAWS - 03-15-2014
(03-11-2014, 11:20 AM)daverep Wrote: Jase,
Yes, sir! I certainly can! You're talking about the original ones you posted in the Reference section, right? And do you want me to PM or email you any updates? Or just post them?
Peza, nice work! BTW, if you think about it, could you snap a photo of the bottom part of your hull where the cockpit meets the hull and send it to me? I'm having a hell of a time visualizing how the tube sits in the inside of the hull. I'd appreciate it!
-Dave
Just post them Dave & I will update from the posts.
Great stuff Peza!
Your killin it.
RE: millenium falcon 32" my story so far - peza - 03-17-2014
eh up all,
i`ve got a fair bit done on the gearbox yesterday and finished off as much as i can,i`ve just gotta wait for some milliput to dry and 1 side of fins to put on and it`s all finished bar the primer.
here are some images hope ya like!
cheers jase it`s come together ok!
[attachment=15694]
[attachment=15695]
[attachment=15696]
[attachment=15697]
RE: millenium falcon 32" my story so far - peza - 04-21-2014
eh up all,
once again soz for bein away for awhile but i`m chasin my tail to get asmuch as i can do for this show next month,i`m showin the old bird as a wip,but i was there last year and if i get tallkin to the same crowd they can see some progression,
well to start i got the front mandible detail finished and primered,
[attachment=15961]
[attachment=15962]
next here is thew gap i have to fill on the dockin bay.
[attachment=15963]
but here is the base for the dockin bay but because the model is made to come apart from top half and bottom half for access to the lights inside if ever needed.
finally i made the ring inside the dockin area but i`ve not started on the detail yet!
[attachment=15964]
[attachment=15965]
well thats it for now,cheers y`all big love drunken peza
RE: millenium falcon 32" my story so far - JAWS - 04-21-2014
Looking good buddy!
RE: millenium falcon 32" my story so far - peza - 04-21-2014
(04-21-2014, 06:01 AM)JAWS Wrote: Looking good buddy!cheers jase i`m gettin happy with it all comin together now!cheers dude peza
RE: millenium falcon 32" my story so far - Guy Cowen - 04-21-2014
Looking good Peza, where you showing her
RE: millenium falcon 32" my story so far - peza - 04-21-2014
(04-21-2014, 09:46 AM)Guy Cowen Wrote: Looking good Peza, where you showing hereh up guy.
i`m showin the old buzzard at the burnley star wars family fun day
it`s the first bank holiday in may i think it`s the 5th/6th,but there is a web site for it and it`s a mint day!!if you can make it,i`d come it`s not to far for me and you..cheers dude...big fan of your build`s mym8
RE: millenium falcon 32" my story so far - peza - 05-20-2014
eh up all.
here is another post for y`all,
i have`nt got alot done over the last 2 weeks,but i started a couple of days ago,so i`m continuing on the dockin ring,first off i got all the armour plates put on and with my dremel and sharp knife made my blaster damage.
[attachment=16155]
next i made a start on the inner and outer detail,got quite abit done but i can`t wait to primer it to see if i got it all ok,sayin that i`ve still got afew parts to make and put on yet!but you get the idea...
[attachment=16156]
well that`s it for now and i`ll post some more once i get it finished up.
...cheers peza
RE: millenium falcon 32" my story so far - Wombat - 05-20-2014
Nothing quite like a good ol scratch build. Thats some nice work there once again, Peza.
RE: millenium falcon 32" my story so far - peza - 05-20-2014
(05-20-2014, 06:46 AM)Wombat Wrote: Nothing quite like a good ol scratch build. Thats some nice work there once again, Peza.cheers buddy!i gettin happy with it
..pezaRE: millenium falcon 32" my story so far - Wombat - 05-20-2014
So you should be..
